Triecienurbjmašīna SBEV 1300-2, Metabo
| Maximum torque: 44 Nm/16 Nm
Drill diameter in
- Masonry: 24 mm
- Concrete: 22 mm
- Steel: 16 mm/10 mm
- Soft wood: 40 mm/25 mm
Idle revolutions: 0 - 1.100 / 0 - 3.100 /min
Rated input power: 1.300 W
Output power: 730 W
Revolutions at rated load: 1.100/3.100 /min
Maximum impact rate: 58.900 /min
Drill spindle thread: 1/2'' -20 UNF
Chuck adapter: 1 - 13 mm
Drill spindle with hexagonal recess: 1/4'' (6,35 mm)
Weight (without power cable) 2,8 kg
Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
Thumbwheel for Speed Preselection
Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
Robust die cast aluminium gear housing for optimum heat dissipation and long service life
Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
Metabo Marathon-motor with dust protection for long service life
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
Forward and reverse rotation
Spindle with hexagonal recess for screwdriver bits for working without chuck
Overload protection: protects the motor from overheating
Restart protection: prevents unintentional start-up after power supply interruption
Cable-protecting ball joint for optimal freedom of motion when working
Wear Indication for Carbon Brush
Scope of delivery:
Futuro Top keyless chuck, rubber-coated side handle, drilling depth guide
Delivered in carry case | ||
|
Ražotājs:
METABO
