Alpine DSP Amplifier 4 Channels/Subwoofer PWD-X5
Technical Specifications
- Power output:
Rated power: 25W*4+165W;
peak power: 50W*4+240W - Signal-to-noise ratio: ≥80dB
- Bass boost: -12dB~+12dB
- Frequency response: 20Hz~20KHz
- Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
- Phase selection: 0°/180°
- Remote ON: DC high-level /REM input activation
- Operating temperature: -10~60°C
- Storage temperature: -40~85°C
- Power source: DC 14.4V (9V~16V) negative ground
- Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
- Activate REM output: +12V activation voltage output (0.5A)
- Stand-by current: 750mA
- Net weight: 5.35kg
- Measurements: 350mm (L) *245mm (W) *80mm (H)
Functional Parameters
- Type of input signals: 4-channel high-level, 4-channel stereophonic low-level, Bluetooth
- Output position: 4-channel amplifier output (4Ω 25W*4)
- Output signal gain:
Master volume: 0~35;
Subwoofer volume: 0~15 - Filter slope:
CH1~CH4 6 dB/Oct or 12dB/Oct
CH5 6/12/18/24dB/Oct - Q value: 0.404~28.85
- Delay: 0.000~5.4ms/0.000~187cm
- PreSets: 15 presets selectable
Ražotājs:
ALPINE
